Comparison of Sealing Surface Degree Assessment Based on Orthophotomap and Lidar Data

Authors

Natalia Borowiec, Faculty of Mining Surveying and Environmental Engineering, Department of Geoinformation, Photogrammetry and Remote Sensing of Environment AGH University of Science and Technology (Kraków, Poland)
Adam Hamerla, Department of Water Protection, Central Mining Institute (Katowice, Poland)

Author ORCID Identifier

Natalia Borowiec 0000-0001-6051-4300

Adam Hamerla 0000-0002-9129-2621

Abstract

The following article compares the methods and the results of sealing surface degree assessment. In the described experiment/research, orthophotomap and point cloud obtained from airborne laser scanning were used as input for the analysis. In this paper, apart from the statement and comparing the results, the problems and limitations of using different research methods are also listed.

Recommended Citation

Borowiec, Natalia and Hamerla, Adam (2013) "Comparison of Sealing Surface Degree Assessment Based on Orthophotomap and Lidar Data," Journal of Sustainable Mining: Vol. 12 : Iss. 1 , Article 7.
Available at: https://doi.org/10.46873/2300-3960.1315

Creative Commons License

This work is licensed under a Creative Commons Attribution-Noncommercial-No Derivative Works 4.0 License.